幸运二八

products

 
Matting Agent
Interior Matting AgentM-10For hybrid powders, provide above 5%(60°) of gloss. It doesn't react with epoxy. Wax-free type. Low usage. High cost-effective. Good coating film effect, anti-yellowing and impact resistance properties.Pre-mix and co-extrusion, 3.1% by weight of the total formula to obtain 5%(60°) of gloss.
Interior matting agentM-11For hybrid powders, provide above 20%(60°) of gloss. It doesn't react with epoxy. Wax-free type. Excellent coating film effect. Good anti-yellowing and impact resistance properties.Pre-mix and co-extrusion, 0.6-0.8% by weight of the total formula to get 30%(60°) of gloss.
Interior Matting AgentM-12For hybrid powders, provide above 5%(60°) of gloss. It doesn't react with epoxy. Wax-free type. Excellent fineness film effect.Can be used for curing @170/15min.Pre-mix and co-extrusion, 4% by weight of the total formula to obtain 5%(60°) of gloss.
Interior Matting AgentM-20For hybrid powders, provide above 3%(60°) of gloss. Wax-free type. It reacts with epoxy as 1:2.3. Good anti-yellowing and impact resistance properties. Outstanding storage stability.Pre-mix and co-extrusion, 5% by weight of the total formula to obtain 3%(60°) of gloss.
Interior Matting AgentM-21For hybrid powders, provide above 3%(60°) of gloss.Low wax containing.it reacts with epoxy as 1:2.3. Good anti-yellowing and impact resistance properties.Outstanding gloss stability.Pre-mix and co-extrusion, 5% by weight of the total formula to obtain 3%(60°) of gloss.
Interior Matting AgentM-30For hybrid powders, provide above 10%(60°) of gloss.Contain a waxy component. It reacts with epoxy as 1:1.3. Good storage stability ,anti-yellowing and impact resistance properties.Pre-mix and co-extrusion, 3% by weight of the total formula to obtain 10%(60°) of gloss.
Exterior Matting AgentM-60For polyester/TGIC powders,provide above 10%(60°) of gloss. Good gloss-reducing property. Good gloss stability. Provide good flow, anti-yellowing and fineness surface.Pre-mix and co-extrusion, 4.5% by weight of the total formula to obtain 15%(60°) of gloss.
Exterior Matting AgentM-70For polyester/TGIC powders,provide above 5%(60°) of gloss.Good matting property and better scratch resistance, impact property and gloss stability than polyester/GMA matting system.Pre-mix and co-extrusion, 5.5% by weight of the total formula to obtain 5%(60°) of gloss.
Exterior Matting ResinM-650GMA acrylic resin. Provide 1-60%(60°) of gloss. Especially for below 5%(60°) of gloss in exterior pure polyester powder coatings.Pre-mix and co-extrusion,12% by weight of the total formula to obtain 5%(60°) of gloss.
Curing Agent
Outdoor pure polyester curing agentTGICUsed for Carboxyl polyester and Carboxyl acrylic resin based powder coatings. Good weatherability resistance and anti-yellowing of film.Pure polyester/TGIC=93/7
HAA hardenerKC552Environmental product, substitute of TGIC. Fast curing, provide excellent outdoor application. The gel time longer than Primid XL552 for 20 seconds, easier to degas.Pure polyester/KC552=95/5
DicyandiamideKC5010Epoxy resin curing agent, curing conditions is 200℃/15min. It will obtain better effect when KC5010 match with KC5230 to use.Pre-mix and co-extrusion, 4% by weight of epoxy resins.
Ultrafine Powder DicyandiamideKC5020Fine powder epoxy resin curing agent. Dv90 is10µm. Good curing effect. Curing conditions is 180℃/15min or 16 0℃/30min.Pre-mix and co-extrusion, 4% by weight of epoxy resins.
Modified DicyandiamideKC5030Better compatibility flow and low temperature curing. Formulating high gloss pure epoxy powders, do antiseptic powder. Or match with other additives to obtain semi-gloss, dead gloss or art powders. Curing condition: 160℃/15minPre-mix and co-extrusion, 7% by weight of epoxy resins.
Leveling Agent
Leveling AdditiveKC701BAdjust surface tension. Wettability effect for substrate and pigment, filler. Eliminate pinholes effectively, and promote the flow.Pre-mix and co-extrusion, 0.5-1.5% by weight of the total formula.
Active Liquid Leveling AgentKC7020Homogeneity of the coating surface tension, reduce orange peel and eliminate pinholes. The cured coating film has a smooth and glossy appearance.Making the masterbatch first.Pre-mix and co-extrusion, 0.6% by weight of the total formula.
Universe Solid Leveling AgentKC758Universal leveling agent. Homogeneity of the coating surface tension, reduce orange peel and eliminate pinholes, improve leveling performance and uniform spray properties.Pre-mix and co-extrusion, 0.5-1% by weight of the total formula.
Degassing Agent
BenzoinEfficient degassing agent for powder coatings. The function is eliminate the bubbles in the melt powder coating. Or Remove coating film pinhole, suitable all types of powder coating systems.Pre-mix and co-extrusion, 0.3-0.6% by weight of the total formula.
Smooth Degassing AgentKC9500By reducing the melt viscosity, absorb volatile small molecules released from the film, and then obtain degassing effect. Improve wetting and dispersing of powders for substrates, pigment and fillers. High melting point. Good looseness and anti-cakiPre-mix and co-extrusion, 0.5-2% by weight of the total formula.
High Efficiency Degassing AgentKC961Significantly improved degassing of the porous substrates, increased scratch resistance. Good anti-yellowing performance. Alternative of Ceraflour 961 from BYK. Especially suitable for galvanized steel plate, cast iron. Can be used by dry blending.Pre-mix and co-extrusion/dry blending, 0.3-2% by weight of the total formula.
Texture Additives
Dot flower dispersantKC4010Do dot flower diffusion effects, can form a proliferation, peacock, pattern, such as willow, multicolor and granite stones etc.Specific dosage depending on availability.
Floating Texture AgentKC4030PUsed for artistic powder coatings. Can obtain all kinds of art pattern finish by using different methods.Dry blend, 0.2-0.5% by weight of the total formula.
PowerlinkKC4040For epoxy/dicyanodiamide and other powder coating sysrtem. Has excellent curing and acceleration effect, be used for making powerlink powder and also has matting effect for powder coatings. Used for making artistic powder coatings such as sand grain,Total 2%-4%.
Texture Agent CABKC4050American Eastman product, be used as texture agent in powder coatings, less dosage and easy to use.Pre-mix and co-extrusion, 0.05-0.4% by weight of the total formula.
Sand profile waxKC4610Sand grain stereoscopic thin, fast extrusion,low usage level. Gloss is slightly higher than that of conventional sand grain agent, up to 20% gloss. As alternative PowderTex61of America Shamrock company.Pre-mix and co-extrusion, 0.1-0.5% by weight of the total formula.
Sand-like Texture AgentKC4700Fine granule texture agent, high purity. The texture has strong sense of bump, matte surface, smooth and good scratch resistance.Pre-mix and co-extrusion, 0.1-0.5% by weight of the total formula.
Antioxidants
Compound AntioxidantKC1020Excellent oxidation resistance, good processing stability and long lasting stability, high cost-effective.Pre-mix and co-extrusion, 0.2-1% by weight of the total formula.
Ultraviolet AbsorbentKC1310Excellent weathering properties, with the features of light color, tasteless, non-toxic, good compatibility. Protective effect for polymers and be helpful for the decrease the loss in color, delaying yellowing and block the loss of physical property.Pre-mix and co-extrusion, 0.1-0.5% by weight of the total formula.
Efficient Flame RetardantsKC1410Low usage, good flame resistance and high thermal stability.Pre-mix and co-extrusion, 2-5% by weight of the total formula.
Charge additives
Charging AdditiveKC3010Enhance the conductivity, economic additive.Pre-mix and co-extrusion, 0.1-0.5% by weight of the total formula.
Efficient Charge Enhancing AgentKC3020Enhance the conductivity. Leak away the surface electric charge of the workpiece in time when spraying. Thereby overcoming the electrostatic shielding effect, so that it is easy to be coated at the inner surface and corners.Pre-mix and co-extrusion, 0.1-0.5% by weight of the total formula.
Anti-static AgentKC3080Improve the spray coverage and film build rate of the coatings. Reduce the Faraday cage effect, especially help to improve the extraction rate of the recess.Total 0.2%-0.5%.
Antistatic AgentKC3090Reduce static electricity.The volume resistance of coating surface reduced from1014~16 ω to 108~10 ω. Can prevent the establishment of DC potential when spraying, and then get a uniform thickness coating.Pre-mix and co-extrusion, 0.2-0.5% by weight of the total formula.
Accelerators
Curing AcceleratorKC5210Used as curing accelerator for pure epoxy, hybrid, PES/TGIC powder coatings. Reduce curing temperature, shorten the curing time. Significantly improve the curing incomplete phenomenon, improve the plate impact performance and enhance the substrate adPre-mix and co-extrusion, 0.03-0.15% by weight of the total formula.
Curing AcceleratorKC5230Used as curing accelerator for pure epoxy, epoxy polyester, PES/TGIC powder coatings. Excellent curing and Promoting effect. Improve significantly shorten curing temperature, improve curing effect. Anti-yellowing temperature up to 230℃Pre-mix and co-extrusion, 0.03-0.15% by weight of the total formula.
Wax
Scratch-resistant AgentKC6010PHigh hardness and high melting point organic wax with high purity. It can increase hardness, scratch resistance and anti-viscosity of film, economic wax.Pre-mix and co-extrusion, 0.3-1% by weight of the total formula.
Transfer WaxKC6120Mainly used in transfer-image powder coating. Easy to tear the paper and transfer lines clear. enhance film fullness and smoothness, and improve scratch resistance.Pre-mix and co-extrusion, 0.1-0.3% by weight of the total formula.
Special Modified WaxKC6200Special processing modified wax. Usually used to improve the hardness in metallic powders. Recommend used in bonding machine.Pre-mix and co-extrusion, 0.3-1% by weight of the total formula.
Hardening AgentKC6240Size Dv50 5 μ m, high hardness. Good abrasion resistance, high purity, excellent scratch resistance, scratch resistance and smooth touch feeling. Can be used by dry blending.Pre-mix and co-extrusion or dry blending, 0.3-2% by weight of the total formula.
PTFE WaxKC6100FSize Dv50 5 μ m, high hardness. Fine particle shape and more concentrated in the range of particle size. Improve surface hardness, smoothness and frictional resistance significantly.Pre-mix and co-extrusion or dry blending, 0.3-2% by weight of the total formula.
Other Additives
Efficient Coupling AgentKC2020The unique surface chemical wrapped processing technology, can change the surface properties of inorganic filler and the viscosity of the resin, improve the filler of infiltration and dispersion in the resin.Improve the physical properties and chemicPre-mix and co-extrusion, 0.5-2% by weight of the total formula.
Hydrogenated Castor OilKC2110Can adjust the viscosity and surface tension, improve the pigment dispersion, as well as improving the flow.Pre-mix and co-extrusion, 0.5-1% by weight of the total formula.
Adhesion PromoterKC2140Improve substrate adhesion significantly, especially for galvanized sheet etc.Pre-mix and co-extrusion, 1-2% by weight of the total formula.
Silver Powder Aligned AgentKC2210Promote the gold and silver powder, pearl powder floated to the surface of powder coatings, the metal powders floated to the coating surface are regularly arranged, thereby increasing the brightness and gloss of the surface. And then reduce the usagePre-mix and co-extrusion, 0.5-1% by weight of the total formula.
Fumed SilicaKC2300Pre-mix and co-extrusion: increase coverage and reduce powder flowability, enhance the hardness of film. Dry Blending: Improve the loose of thePre-mix and co-extrusion, according to the request to use; dry blending: 0.1% by weight of the total
Anti-interference AgentKC2400Used in powder coatings, avoid shrinkage, pinholes, pits and surface light loss and other issues caused by the incompatible of different powders.Pre-mix and co-extrusion, 0.3-1% by weight of the total formula.
Organic BentoniteKC2830Greatly increased the melt viscosity of powder to prevent the flow, and then form wrinkles sand-like texture effect of the film. Can be used alone or together with sand-like agent or wrinkle agent to adjust the size of texture. Reduce the dosage andPre-mix and co-extrusion, 0.3-2% by weight of the total formula.

Categories

Contact Us

  • Tel:

    86-551-68113128
  • Fax:

    86-551-68174569
  • Phone:

    86-18326059292
  • E-mail:

    sales@bjhtv.com
  • Address:

    Sanhe Town Industrial
  • Park,Hefei,Anhui,China.


Join our Mailing List

  • Stay up to date on the latest industry events and technical information!
  • Your Email Address *